 |
NOTE:
Some of the files on this page are in PDF format and require Adobe's Acrobat
Reader (freeware) in order to be viewed. |
| Metacaulk® products are a family of firestopping products specifically designed to fill voids in construction joints and
around penetrations in fire rated walls or floors. Each time a fire rated wall or floor is
penetrated, it must be restored to its original fire rating. Many Metacaulk products have
intumescent properties which cause them to expand when heated, forming a high strength
insulating char. In the event of fire, Metacaulk sealants will restrict the spread of
flames, smoke, hot gases and water through penetration openings and construction joints.
Metacaulk sealants are tested in accordance with one or more of the following standards --
ASTM E814, UL 1479, CAN4-S115M and UL 2079 Fire Test Standards for up to a 4 hour fire
rating in addition to ASTM E84, UL 723 Surface Burning Characteristics.
Complies to Required Environmental Testing of Accelerated Aging and High
Humidity as per UL 1479 Fire Test of Through-Penetration Firestops. |
Click
Here to view Interactive CatalogMetacaulk® 950 is a water based sealant
designed for use on metal pipe including steel, EMT, copper, aluminum and glass pipe as
well as telephone and power cables. Can also be used with PVC, CPVC and polybutylene (PB)
plastic pipe on closed (pressure) systems.
|
Metacaulk® 835+ is a silicone based
sealant designed for use on PVC pipe - closed (pressure systems), EMT, insulated and
uninsulated steel pipe, glass pipe, construction and control joints and interior expansion
joints. It is a flexible, non-sag low odor sealant for exterior or interior use and can be
used in systems where dynamic movement is expected. STC 55*.
|
Metacaulk® 1000 is a water based,
single-component, general purpose, fire-rated sealant for through-penetrations on both
vertical and horizontal surfaces, as well as construction joints. It is designed for use
in floors or walls and can be used on PVC, CPVC, ABS, PVC foam core, ABS foam core, PP or
plastic pipes, polybutylene (PB), insulated and uninsulated steel pipe, copper and cast
iron. STC 54*. Complies to Required Environmental Testing of Accelerated
Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration
Firestops. US Patent Number 6,207,085.
|
Metacaulk® 1100 is a water-based,
intumescent, fire-stopping mastic and smoke seal. It is designed for spray application and
to provide a fast, economical means of installation on long joint runs. Metacaulk® 1100
cures to a flexible membrane seal and is suitable for use where dynamic movement occurs.
It can be sprayed, brushed or troweled into construction joints (such as top-of-the-wall
and curtain wall perimeter) and general construction gaps and voids. Metacaulk® 1100 is
non-sagging, nontoxic, economical, and paintable. STC 54*.
|
Metacaulk® 1200 is a water-based firestop sealant
that comes in three different grades. A spray application of Metacaulk®
1200 provides a fast, economical means of installation for long joint runs.
Self Leveling is made for horizontal applications and caulk grade is a
non-sag sealant that is easy to apply. Metacaulk® 1200
is also an excellent, fire-rated acoustical sealant. It cures to an elastomeric membrane
seal suitable for use where dynamic movement is expected. STC Rating 50*,.
|
Metacaulk® Firestop Pillows are
intumescent and designed for use primarily in large openings with cables, cable trays,
blank openings or multiple penetrating items.
|
Metacaulk® Fire Rated Mortar is a load
bearing mortar formulated to economically firestop large openings for through-penetrations
in fire rated walls and floors. It can be used with power cables, fiber optic or telephone
cables, aluminum or steel cable trays, EMT, copper, steel or cast iron pipe.
|
Metacaulk®) Pipe Collars are
prefabricated for through-penetration firestop systems using PVC, CPVC, ABS,
PVC foam core, ABS foam core, FRPP, PEX pipe and Electrical Cable. Designed
to reduce installation time by 25% and the simple locking mechanism insures
easy installation. Metacaulk® Pipe Collars are economical because no backfill
is usually required. UL Classified for both open and closed pipe systems.
Complies to Required Environmental Testing of Accelerated Aging and High
Humidity as per UL 1479 Fire Test of Through-Penetration Firestops. US
Patent Number 6,207,085.
|
Metacaulk® Wrap Strip is a flexible
strip of highly intumescent firestop material used primarily for plastic and insulated
pipe applications. When exposed to heat, this product expands and forms a hard char to
seal off the penetration by preventing the passage of flames and hot gases.
Complies to Required Environmental Testing of Accelerated Aging and High
Humidity as per UL 1479 Fire Test of Through-Penetration Firestops. US
Patent Number 6,207,085.
|
Metacaulk® Putty Sticks are used to seal
around penetrating items through fire rated walls, floors and within blank openings. For
use with electrical cables, conduit and metal pipes. Hand moldable with no curing time
required. Will not dry out and can be re-used as additional penetrating items are removed
or installed.
|
Metacaulk® Putty Pads are used to
maintain the hourly rating of fire rated walls containing electrical outlet boxes and to
reduce sound transmission. Only one pad thickness (1/8) inch is required for a 1 or 2 hour
fire rating. No additional putty material is needed to plug the end of each electrical
metallic tube or conduit at its connection to the box. STC Rating 49*.
|
Metacaulk® Box Guard™ is a one
component fire rated pad for use in electrical boxes. It is inserted on the inside back
wall of an electrical box and is a highly intumescent firestop material. Saves labor
costs. Box Guard™ is an economical alternative to putty pads. Great for use on retrofit
jobs. STC Rating 53*. Complies to Required Environmental Testing of
Accelerated Aging and High Humidity as per UL 1479 Fire Test of
Through-Penetration Firestops. US Patent Number 6,207,085.
|
Metacaulk® MC 150+ is a
one component, general purpose fire-rated sealant and smoke seal for
construction joints and through-penetrations. It prevents the spread of
flames, smoke, and gas through penetration openings. Metacaulk® MC 150+ is a
water based, non-sag caulking grade sealant that is easy to apply as well
as to retrofit. Metacaulk® MC 150+ can be used on various
penetrations such as top of the wall construction joints, deflection track
wall systems, EMT, telephone and power cables in concrete floors and
walls, gypsum walls as well as wood floors. Metacaulk® MC 150+ may be applied with a caulking gun or trowel. For large applications, it may
be pumped from the pail. Metacaulk® MC 150+ cures to an elastomeric seal
that is suitable where dynamic movement is expected. STC rating 51*.
|
|
Metacaulk® Joint Strip is
a flexible, highly intumescent firestop material used in concrete and
masonry control joints up to 1" wide. It forms a strong char that prevents
the passage of flame, smoke and hot gases between control joints.
Metacaulk®
Joint Strips are ideal for stadium construction, tilt up panels, curtain
wall panels and all vertical concrete and masonry construction joint
applications where a fire rated control joint is required. Complies to
Required Environmental Testing of Accelerated Aging and High Humidity as
per UL 1479 Fire Test of Through-Penetration Firestops.
|
Metacaulk® Cover Guard™ is a single
component fire rated gasket for use with electrical boxes when addressing
the "24 inch rule". Metacaulk® Cover Guard™ is applied by hand, does not
take up volume in the electrical box and is a labor saving replacement for
putty pads in normal applications. Patent Pending. STC rating 54*.
Complies to Required Environmental Testing of Accelerated Aging and High
Humidity as per UL 1479 Fire Test of Through-Penetration Firestops. US
Patent Number 6,207,085.
|
|
| PDF Files Click to view. Right- click to copy. |
 Product Data sheetMSDSProduct
Code Numbers & SizesApprovals |
|
|
Metacaulk 350i is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Intumescent, water based, non sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastromeric seal that is suitable where dynamic movement is expected. STC rating 53, Tested in a UL 411 wall assembly/section to ASTM E90. Complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops.
US Patent Number 6,207,085.
|
||||
| PDF Files Click to view. Right- click to copy. |
|
Promotional Literature | ||
|
Metacaulk Cast-In-Place Firestop Devices
are designed for use in poured concrete floors to form a through
penetration firestop system. This device is installed prior to
the concrete being poured and the forms are removed, Metacaulk®
Cast-In-Place Firestop Devices provide a firestopped opening
that allows for a variety of materials to pass through them such
as plastic, metal and insulated pipes, as well as cable and wire
bundles.
|
||||
| PDF Files Click to view. Right- click to copy. |
|
|||
NOT PHOTOGRAPHED —
RectorSeal
Mineral Wool Safing MSDS (PDF File)
Product
Code Numbers & Sizes
A
complete line of Firestopping Accessories available. Click here
to view Product Code Numbers & Sizes.
 |
For additional information on Metacaulk® Firestopping Products, call for a free copy of our Metacaulk® Products Catalog or CD. Also, ask about our handy Step-By-Step™ installation Guide. |
For technical assistance, call 713/263-8001 or toll free in the U.S. 800/231-3345.
